The Rinnai Infinity KCM Series of continuous flow water heaters will never run out of hot water. Whilst electricity, water and gas services are connected, temperature accurate hot water will be available whenever hot water outlets are open. The KCM has market leading efficiency at 93% (Gross) saving energy and operational costs.
Innovative micro-processors ensure that hot water is delivered at the desired pre-set temperature. This feature supports compliance to legionella best practice, promotes comfort, eliminates the risk of scalding, and maximises system efficiency.
- Compact size saving wall and floor space (dimensions length 670x 470x 257)
- Light weight 26kgs (no need for heavy lifting gear
- Hot Water Delivery Capacity 15.4 ltr/min raised 33°C
- Temperature Accuracy -1 / +1 from the appliance set point
- Exhaust System Forced Room Sealed
- Max Flue Run 13m (less 2m per 90° bend & 1m per 45° bend)
- Temperature Range 50°C – 60°C
- Ignition Method Direct electronic
- Gas Consumption Natural Gas 38.1 kW max
- Gas Consumption LPG 38.1 kW max
- Gross Efficiency 93%
- Net Efficiency 103%
The advanced micro-processors will measure incoming water temperatures and modulate the gas input to guarantee that the system will only use the required energy to increase the water temperature saving energy, money, and carbon.
The water heater constantly monitors the hot water temperature if fluctuations in system temperature do occur the gas water heater will switch off if the temperature rises 3 degrees above the set point. The enhanced ignition system is all electric, so there is no pilot flame. When the hot water is off, no gas is used.
The Rinnai KCM continuous flow water heaters are Fan assisted (power flue) appliances. This makes them compact, saving wall and floor space (dimensions length 670x 470x 257). KCM continuous flow water heaters have inbuilt status monitors visualized within the front panel, making set up, monitoring and error codes easily accessible.
Remote connectivity is also available allowing temperature setting, diagnostic information, error codes and other points to be accessible by BMS or over IP
