Rinnai’s innovative KCM series of continuous flow hot water heaters is designed to specifically increase customer savings in energy, capital, and carbon footprint with the inclusion of internally refined technological advancements. It operates at 93% efficiency.

The KCM unit has micro-processors to ensure hot water is delivered at the exact pre-set temperature. The advanced micro-processors will also measure incoming water temperatures and modulate gas input. This guarantees the system will only use the required amount of energy to increase water temperature whilst supplying limitless volumes of clean hot water.

The inclusion of micro-processors enables the customer to pre-set water temperatures supporting the minimisation of Legionella and eliminating the risk of safety issues such as scalding.

The Rinnai KCM series is of a compact design thus reducing the requirement for installation wall and floor space (unit dimensions length 670x 470x 257). System set up, monitoring and error codes are all made easily available via inbuilt status monitors located at the front of the panel.

The Rinnai Infinity KCM Series of continuous flow water heaters maintains an extensive array of the following operational features and benefits

  • Compact size saving wall and floor space (dimensions length 670x 470x 257)
  • Light weight 26kgs (no need for heavy lifting gear)
  • Hot Water Delivery Capacity 15.4 ltr/min raised 33°C.
  • Temperature Accuracy -1 / +1 from the appliance set point.
  • Exhaust System Forced Room Sealed
  • Max Flue Run 13m (less 2m per 90° bend & 1m per 45° bend)
  • Temperature Range 50°C – 60°
  • Ignition Method Direct electronic
  • Gas Consumption Natural Gas 38.1 kW max
  • Gas Consumption LPG 38.1 kW max
  • Gross Efficiency 93%
  • Net Efficiency 103%

To receive a free brochure on this innovative water heating solution, register today below.